Enhanced Reset Trigger – RARE BREED FRT 15 E3

Enhanced Reset Trigger – RARE BREED FRT 15 E3

 

 

Enhanced Reset Trigger – RARE BREED FRT 15 E3 , is a significant advancement in firearm technology, particularly for AR-15 enthusiasts. This trigger system is engineered to provide a unique shooting experience by markedly increasing the rate of fire while maintaining accuracy and control.

 

Buy Enhanced Reset Trigger – RARE BREED FRT 15 E3

 

At the core of the FRT-15 E3 is its innovative forced reset mechanism. Unlike traditional semi-automatic triggers, the FRT-15 E3 utilizes the firearm’s bolt carrier group to forcibly reset the trigger after each shot. This design ensures that the trigger is ready to fire the next round as soon as the shooter releases it, allowing for rapid follow-up shots. The forced reset mechanism operates mechanically, without the need for electronic components, ensuring reliability under various conditions.

 

Buy RARE BREED FRT 15 E3 online usa

 

Designed for ease of installation, the FRT-15 E3 fits standard AR-15 lower receivers without the need for permanent modifications. It is compatible with both mil-spec and many commercial lower receivers. However, due to the unique mechanics of the forced reset system, it is crucial to ensure that the firearm’s bolt carrier group and buffer system are in good condition and properly maintained to guarantee optimal performance.

 

 

Performance and User Experience

Shooters using the FRT-15 E3 can expect a significant increase in their rate of fire, approaching that of fully automatic firearms, while still maintaining semi-automatic functionality. The trigger pull is crisp, with a short reset, allowing for precise shot placement even during rapid firing sequences. Users have reported that, with practice, they can achieve impressive control over their shooting speed and accuracy.

Legal Considerations

It’s important to note that the FRT-15 E3’s design has attracted attention from regulatory agencies due to its capability to increase the rate of fire. Potential buyers should stay informed about current laws and regulations regarding trigger modifications in their jurisdiction, as ownership and use of the FRT-15 E3 may be subject to legal restrictions.

The Enhanced Reset Trigger (ERT) represents a significant leap in firearm technology, offering AR-15 enthusiasts a powerful upgrade for speed, precision, and control. Building on the foundation of the Wide Open Trigger (WOT), the ERT introduces a versatile three-position system—Safe, Semi, and Hard Reset—designed to meet the demands of competitive shooters, tactical operators, and recreational enthusiasts. Engineered for seamless integration with AR-15 platforms, this trigger delivers rapid reset capabilities, a crisp trigger pull, and unmatched durability, making it a top choice for those seeking to elevate their shooting experience.

 

 

In the dynamic world of firearms, shooters are constantly pursuing innovations that enhance performance without compromising reliability or safety. The ERT addresses these needs with its robust construction, user-friendly design, and advanced reset mechanism, offering a balance of speed and accuracy that sets it apart from traditional triggers. This comprehensive guide explores the mechanics, features, benefits, installation process, legal considerations, and practical applications of the Enhanced Reset Trigger, providing essential insights for anyone looking to optimize their AR-15.

Key Features of the Enhanced Reset Trigger

The Enhanced Reset Trigger is packed with features that make it a standout upgrade for AR-15 platforms. Below are the core attributes that define its performance:

 

 

Three Selectable Positions:

 

 

Safe Mode: Ensures complete firearm safety with a reliable lockout mechanism, preventing accidental discharge during handling or storage.

 

Semi-Automatic Mode: Delivers a smooth, consistent trigger pull for precise, controlled shooting, ideal for target practice or long-range accuracy.

 

Hard Reset Mode: Features a rapid reset mechanism that minimizes trigger lag, enabling faster follow-up shots for tactical or competitive scenarios.

 

Quick Reset Mechanism: The ERT’s hallmark feature is its fast reset, reducing the time between shots and enhancing firing speed.

 

Light Trigger Pull: With an approximate pull weight of 3 lbs, the ERT offers a crisp, responsive feel, minimizing creep and improving accuracy.

 

Durable Construction: Crafted from Reinforced Hardox™, the world’s most abrasion-resistant steel, combined with high-quality aluminum and polymer components, ensuring exceptional longevity.

 

 

 

Plug-and-Play Installation: Designed as a drop-in replacement, the ERT includes anti-walk pins for secure attachment and requires no additional modifications.

 

Three-Position Safety Selector: Allows seamless switching between modes, accessible to both left- and right-handed shooters.

 

Compatibility: Engineered for MIL-SPEC AR-15 lowers, requiring a full-auto-compatible bolt carrier group (BCG) for optimal performance.

 

User-Friendly Design: Intuitive operation and easy installation make it accessible to shooters of all experience levels.

These features combine to create a versatile, high-performance trigger system that caters to a wide range of shooting needs, from recreational range sessions to high-stakes competitions.

Mechanics and Performance Benefits

How the Enhanced Reset Trigger Works

The Enhanced Reset Trigger enhances AR-15 performance through its innovative reset mechanism. In Hard Reset Mode, the trigger resets rapidly after each shot, locking until the BCG returns to battery, allowing shooters to fire follow-up shots with minimal delay. Unlike binary triggers, which fire on both pull and release, the ERT focuses on speeding up the reset process in Hard Reset Mode, maintaining a single shot per pull while reducing reset time. In Semi-Automatic Mode, it functions like a standard trigger, offering a smooth, consistent pull for precision shooting.

The ERT’s 3 lb trigger pull weight ensures a crisp, clean break, enhancing shooter control and accuracy. The three-position safety selector, integrated into the trigger assembly, allows quick mode changes without altering grip, ensuring operational efficiency. The trigger’s design leverages a spring-loaded mechanism and robust materials to ensure reliable cycling, even under high-round-count conditions.

Performance Advantages

The ERT offers a range of benefits that elevate the AR-15 shooting experience:

 

 

Faster Firing Speed: Hard Reset Mode significantly reduces reset time, enabling cycle rates of 400–600 rounds per minute, depending on the shooter’s skill and firearm setup. This is ideal for competitive shooting or tactical drills requiring rapid follow-ups.

 

Enhanced Accuracy: The light, 3 lb trigger pull minimizes creep, allowing shooters to maintain consistent shot placement, even at high speeds.

 

Versatility Across Scenarios: Safe Mode ensures secure handling, Semi Mode supports precision shooting, and Hard Reset Mode excels in rapid-fire applications, making the ERT suitable for competitions, tactical training, and recreational use.

 

Unmatched Durability: Constructed from Reinforced Hardox™ steel, the ERT withstands intense use, delivering consistent performance in demanding environments.

 

Improved User Experience: Shooters report a smoother, more responsive trigger feel, reducing fatigue and enhancing control during extended sessions.

Compatibility Requirements

The ERT requires a full-auto-compatible BCG for proper function in Hard Reset Mode. Recommended options include:

 

 

Standard Full-Auto BCG (Nickel Boron): Ensures smooth cycling and corrosion resistance.

 

Full-Auto BCG (Black Nitride): Offers durability and reduced friction.

 

Low Mass Full-Auto BCG: Enhances cycling speed for faster follow-ups.

An H2 or H3 buffer system is recommended to optimize recoil management and ensure reliable cycling. The ERT is compatible with MIL-SPEC AR-15 lowers but may not function with non-standard platforms like the Sig MCX or AR-10 without modifications.

Installation Guide

Installing the Enhanced Reset Trigger is straightforward due to its drop-in design. Follow these steps for a safe and effective installation:

 

 

Safety Check: Ensure the firearm is unloaded, with the magazine removed and chamber cleared. Engage the safety and verify.

 

Disassemble the Lower Receiver: Remove the existing trigger assembly per the AR-15’s manual, typically involving the pistol grip, safety selector, and trigger pins.

 

Install the ERT: Place the ERT into the lower receiver, aligning the trigger and hammer pins with the receiver’s pin holes. Secure with the included anti-walk pins to prevent movement.

 

Reassemble and Test: Reattach the pistol grip and safety selector, then perform a function check in a safe environment. Test Safe, Semi, and Hard Reset modes to confirm proper operation.

 

Lubrication and Maintenance: Apply high-quality gun lubricant to moving parts to ensure smooth cycling. Regularly clean and inspect the trigger to maintain performance.

For optimal results, test-cycle the firearm with a full-auto BCG and appropriate buffer system before live firing. If issues arise, consult a professional gunsmith to ensure proper installation.

Legal Considerations

As of August 12, 2025, the Enhanced Reset Trigger is legal at the federal level, as it does not classify as a National Firearms Act (NFA) item. Unlike machine guns, which enable continuous firing with a single trigger pull, the ERT fires one round per pull, maintaining semi-automatic status. However, state and local laws may impose restrictions:

 

 

Federal Compliance: The ERT complies with ATF regulations, as it requires deliberate trigger pulls, even in Hard Reset Mode.

 

State Restrictions: States like California, New York, and New Jersey may classify rapid-fire devices, including forced reset triggers, as prohibited under laws like Senate Bill 8. Verify local regulations before purchasing.

 

WADA Ban: The World Anti-Doping Agency bans forced reset triggers in competitive shooting events, so competitors should check event rules.

 

Ongoing Scrutiny: Forced reset triggers face regulatory scrutiny, with potential changes to federal or state laws. Stay informed through resources like the National Rifle Association (NRA) or legal counsel.

Before purchasing, consult local law enforcement or a firearms attorney to confirm legality. Retailers often provide compliance guidance during the purchase process.

Comparative Analysis: ERT vs. Other Triggers

ERT vs. Rare Breed FRT-15

 

 

Mechanism: The ERT uses a forced reset mechanism in Hard Reset Mode, while the FRT-15 employs a similar system with a slightly more aggressive reset. Both enhance firing speed, but the ERT’s 3 lb pull weight offers a lighter, crisper feel.

 

Performance: The ERT excels in versatility with its three-mode selector, while the FRT-15 is favored for its raw speed in competitive settings.

 

Cost: The ERT is often more affordable, offering premium features at a lower price point than the FRT-15.

 

Installation: Both are drop-in systems, but the ERT’s plug-and-play design and included anti-walk pins simplify setup.

ERT vs. Binary Triggers (e.g., FosTecH Echo Sport)

 

 

Mechanism: Binary triggers fire on both pull and release, while the ERT focuses on rapid reset in Hard Reset Mode, offering a different firing rhythm.

 

Speed: Binary triggers may achieve higher cycle rates, but the ERT’s reset mechanism provides smoother, more controlled rapid fire.

 

User Preference: The ERT is ideal for shooters prioritizing reset speed and a light trigger pull, while binary triggers suit those seeking dual-action firing.

For detailed comparisons, websites like Trigger Nest offer user reviews and performance insights across trigger types.

Practical Applications

The Enhanced Reset Trigger is versatile, catering to various shooting scenarios:

 

 

Competitive Shooting: Hard Reset Mode provides a competitive edge in speed-based events like 3-gun or USPSA, while Semi Mode supports precision stages.

 

Tactical Training: Operators benefit from the ERT’s rapid reset and reliability, preparing for high-pressure scenarios.

 

Recreational Shooting: Enthusiasts enjoy the enhanced responsiveness and speed, making range sessions more engaging.

 

Home Defense: Safe and Semi modes ensure reliability in defensive situations, with Hard Reset Mode as a backup for rapid response.

Maintenance and Care

To ensure longevity, maintain the ERT with these tips:

 

 

Cleaning: Remove debris after each use with a soft brush and solvent to prevent malfunctions.

 

Lubrication: Apply gun lubricant to moving parts to ensure smooth operation, especially in Hard Reset Mode.

 

Inspection: Check for wear or damage after high-round-count sessions, consulting a gunsmith if issues arise.

Customer Support and Resources

Retailers and manufacturers provide robust support for ERT users:

 

 

Navigation: Websites offer product details, installation guides, and FAQs, simplifying the purchasing and setup process.

 

Customer Service: Dedicated teams answer questions about compatibility, installation, and maintenance. Warranty information is often available.

 

Retailer Support: Purchase from trusted sources like OpticsPlanet or direct manufacturers, ensuring authenticity and compliance.

Customer Testimonial

“The Enhanced Reset Trigger transformed my AR-15. The Hard Reset Mode is lightning-fast, and the light trigger pull makes every shot precise.” — Alex T., Competitive Shooter.

Frequently Asked Questions

What is the Enhanced Reset Trigger?
A forced reset trigger that enhances firing speed by rapidly resetting the trigger, ideal for competitive and tactical shooting.

Is the ERT legal?
Legal federally but restricted in some states (e.g., CA, NY). Verify local laws before purchasing.

Where can I buy the ERT?
Available from authorized retailers like OpticsPlanet or direct manufacturers. Check stock and compliance.

How does Hard Reset Mode improve shooting?
It reduces reset time, enabling faster follow-up shots while maintaining control and accuracy.

Is the ERT compatible with all AR-15s?
Designed for MIL-SPEC AR-15 lowers with a full-auto BCG; verify compatibility with non-standard platforms.

Conclusion

The Enhanced Reset Trigger is a game-changing upgrade for AR-15 owners, offering unparalleled speed, precision, and durability. Its three-mode functionality, light trigger pull, and robust construction make it a top choice for competitive shooters, tactical operators, and recreational enthusiasts. By understanding its mechanics, legal status, and applications, you can confidently integrate the ERT into your firearm setup. Purchase from trusted sources, verify local laws, and consult professionals for optimal setup to unlock your AR-15’s full potential with the Enhanced Reset Trigger.